Dacor Oven F1 Error
#1
Member
Thread Starter
Join Date: Apr 2007
Posts: 1
Upvotes: 0
Received 0 Upvotes
on
0 Posts
Dacor Oven F1 Error
Replaced the Element Relay Board and still get the error code.
The code may take several days to show up. Oven works fine other wise.
Has anyone seen this happen?
The code may take several days to show up. Oven works fine other wise.
Has anyone seen this happen?
#2
Member
Join Date: Sep 2008
Location: pacific NW
Posts: 1
Upvotes: 0
Received 0 Upvotes
on
0 Posts
Dacor Cps 130 Oven F1 error
We have the same problem and for over a year have used the breaker. It woks fine except when resting off. Has anyone figured this out yet?
Last edited by dnobmij; 09-20-08 at 06:52 PM. Reason: spelling
#3
Member
Join Date: Jan 2009
Location: Pacific coast
Posts: 1
Upvotes: 0
Received 0 Upvotes
on
0 Posts
Workaround for Dacor oven F1 error
My Dacor electric wall oven has the F1 problem, but I found a reasonable way around it.
In my case, this error and the constant beeping start about a minute after the oven is turned off by pressing the Cancel/Secure button after the baking is complete. I found that if I set the Timer1 to 25 minutes or more after the Cancel/Secure button is pressed but before the endless beeping begins, then the error never occurs. Of course, you have to press the Timer1 button again to turn off the alarm when the 25 minutes is up, but there's no further error or beeping.
My oven is from 1995. I noticed that the numerals of the display are not uniformly illuminated, suggesting problems on the control board that drives the display (but not the relay board?).
I can't see paying $400 for a board when I'm not sure that will fix the problem and the oven is so old. A repairman was not helpful--he'd replace the board but not guarantee the error was fixed.
In my case, this error and the constant beeping start about a minute after the oven is turned off by pressing the Cancel/Secure button after the baking is complete. I found that if I set the Timer1 to 25 minutes or more after the Cancel/Secure button is pressed but before the endless beeping begins, then the error never occurs. Of course, you have to press the Timer1 button again to turn off the alarm when the 25 minutes is up, but there's no further error or beeping.
My oven is from 1995. I noticed that the numerals of the display are not uniformly illuminated, suggesting problems on the control board that drives the display (but not the relay board?).
I can't see paying $400 for a board when I'm not sure that will fix the problem and the oven is so old. A repairman was not helpful--he'd replace the board but not guarantee the error was fixed.