Decks, Patios, Porches and Docks - Fasteners

Doityourself.com community forum was created to provide answers to all questions related to home improvement and home repair. Doityourself community can help you find information about how-to topics on small fixes to large remodeling projects. With comprehensive how-to content and expertly moderated community forums DoItYourself.com makes it easy to tackle even the most complex home improvement projects.



PDA

View Full Version : Fasteners

roserc
06-03-02, 07:53 AM
Which fasteners work best for composite decking? I'm about to install Trex on my deck.

I'd like to use nails since I have a paslode nailer, but I don't know whether I should go to the expense of stainless steel or use hot dipped galvanized.

Also, what size nail should I use for 5/4 decking?

Thanks.

josh1
06-03-02, 05:04 PM
typically you want at least 1-1.5" penetration more is just likely to bend nails .. so 10D or 12d and youd be fine around 2 inches. Hope this helps--Josh
josh1
06-03-02, 05:05 PM
oh since you are using trex there shouldnt be any warping cupping etc.. but if anyone out there is using pressure treated go with 16Ds so you can pull the boards straight when you lay them out. HOpe this helps--Josh