Carpentry and Woodworking - finish nailer

Doityourself.com community forum was created to provide answers to all questions related to home improvement and home repair. Doityourself community can help you find information about how-to topics on small fixes to large remodeling projects. With comprehensive how-to content and expertly moderated community forums DoItYourself.com makes it easy to tackle even the most complex home improvement projects.



PDA

View Full Version : finish nailer

rhhjr
03-28-02, 10:42 AM
I searched the archives and couldn't find any discussion on this topic so here's my question: I'm thinking of buying a cordless finish nailer primarily for window and door casing. The two size options seem to be 18 or 16 gauge. The 16 gauge nailer will drive up to 2 and a half inch fasteners; the 18 gauge goes only up to 2". I'm thinking the smaller one couldn't be used to also attach the doorjam to the rough opening, but that the 2.5" nails might work ?? Which size do you own, like, etc...? Also any recommendations on manufacturer: Paslode, Porter-Cable, or whatever. (You probably won't have much luck trying to talk me out of the cordless choice - I don't want to lug a compressor around !). Thanks in advance.

Bazooka227
03-28-02, 11:56 AM
I'm looking into the PC cordless model w/the built in compressor. 7lbs and no fuel cells.
fewalt
03-28-02, 12:07 PM
rhhjr,
I'll try anyway.
I would lug the compressor around just so I could use my Senco finish nailer.
Whatever you decide, go with the 16ga or even 15ga machine.
And a rubber no-marr tip is also a benefit for doing trim work.
fred

garywms
03-28-02, 12:08 PM
The Paslode is going to be the one that you want. I believe that the PC one is discontinued (maybe not). It's never gotten any good reviews. Go out to EBAY and look at some of the prices there. I know you say you don't want a compressor, but think about it again. Both Bostitch and PC have combo paks where you get both the nailer and a small compressor with it. Once you start shooting nails, you'll find other uses for the compressor. If you don't have much casing to do, or this will be a one shot deal, consider renting the gun.