Designing Kitchens and Bathrooms - Shower grab bar installation
Doityourself.com community forum was created to provide answers to all questions related to home improvement and home repair. Doityourself community can help you find information about how-to topics on small fixes to large remodeling projects. With comprehensive how-to content and expertly moderated community forums DoItYourself.com makes it easy to tackle even the most complex home improvement projects.View Full Version : Shower grab bar installation
02-09-02, 03:55 PM
I want to install two 18" grab bars in my 36" square one piece
fiberglass shower stall. The stall walls are backed by drywall.
I have located some of the studs. My problem is the approx. 1" space between the fiberglass surround and the drywall in the places were I need to mount the bars. I am concerned that I will
crack the fiberglass and not have a strong attachment due to the
space between the fiberglass and drywall. Your advice will be appreciated.
tbehnke
fiberglass shower stall. The stall walls are backed by drywall.
I have located some of the studs. My problem is the approx. 1" space between the fiberglass surround and the drywall in the places were I need to mount the bars. I am concerned that I will
crack the fiberglass and not have a strong attachment due to the
space between the fiberglass and drywall. Your advice will be appreciated.
tbehnke
Mike Swearingen
02-10-02, 01:48 PM
Pre-drill holes in the fiberglass, and use at least 3" screws to hold the grab bars to the studs.
Good luck!
Mike
Good luck!
Mike