Gas and Oil Home Heating Furnaces - Circulation Pumb Bearing Assembly

Doityourself.com community forum was created to provide answers to all questions related to home improvement and home repair. Doityourself community can help you find information about how-to topics on small fixes to large remodeling projects. With comprehensive how-to content and expertly moderated community forums DoItYourself.com makes it easy to tackle even the most complex home improvement projects.



PDA

View Full Version : Circulation Pumb Bearing Assembly

11-13-01, 01:34 AM
The bearing assembly on my circulation pump is randomly making some banging noises. My furnace guy tells me the bearing is going out of the unit. My question is when replacing the bearing assembly (Armstrong part# 816019-002), do I also need to replace the impellor and or can I just pull the bearing assembly off and put a new one on?

Thanks

PDF
11-14-01, 08:53 AM
is to look at old impeller compared to new impeller.I have learned on this forum that different parts of this country have alot of different types of water---if your water is heavily treated---the impeller MAY be worn and not recirc water properly.PDF
rclhvac
11-15-01, 10:30 AM
You have it apart - Why not replace the impeller & not worry about it any more.