Entertainment Center: TVs, Stereos, VCRs and DVDs - zenith convergence question

Doityourself.com community forum was created to provide answers to all questions related to home improvement and home repair. Doityourself community can help you find information about how-to topics on small fixes to large remodeling projects. With comprehensive how-to content and expertly moderated community forums DoItYourself.com makes it easy to tackle even the most complex home improvement projects.



PDA

View Full Version : zenith convergence question

10-29-01, 06:30 AM
I have a zenith 50" tv. I have noticed a yellow tint on things that should be white. I went to the convergence setup to adjust this. My owner's manual says that on the convergence screen there should be 4 white lines, 2 vertical and 2 horizontal. My vertical lines are yellow and there is no blue vertical line to adjust. Should there be a blue vertical line and why are my vertical lines yellow?
Thanks!

Smokey
10-30-01, 08:09 AM
Good Afternoon, Dave68:

Consider that the color spectrum you are viewing is made up of three primary colors: red, blue, and green. If you have green and blue, you have yellow. Therefore, your problem is a lack of red.

Therefore, you should be troubleshooting the red projection system for a bad projection driver or a bad projection tube.

Smokey ;)