Decks, Patios, Porches and Docks - Back Door Platform & Steps

Doityourself.com community forum was created to provide answers to all questions related to home improvement and home repair. Doityourself community can help you find information about how-to topics on small fixes to large remodeling projects. With comprehensive how-to content and expertly moderated community forums DoItYourself.com makes it easy to tackle even the most complex home improvement projects.



PDA

View Full Version : Back Door Platform & Steps

Money Pitt
09-05-01, 09:36 AM
My mother in law wants me to build a platform in place of the deterorating cement steps at her back door.

She wants me to build a 4' wide by 3' deep platform with 2 steps down to the ground.

My question is; Is 2x6 framing on 4x4 posts strong enough for this project or do I need to use larger material sizings? It will not be attached to the house.

Thanks for the feed back and assistance.

fewalt
09-05-01, 03:37 PM
Money Pitt,
You might want to check your local codes, but 2 x6s on 4 x 4 posts certainly should be sufficient.
fred
some help
09-08-01, 12:32 AM
HELLO
how do you plan on building it? You should use PT wood. a concrete base and good suport under the steps;

Money Pitt
09-10-01, 02:32 AM
Thanks for all input. I did use all Pressure Treated materials on 6 PP 4x4s 2" deep to prevent frost heaving. Railings on both sides using 4x4 to carry rails as well. I think it looks nice and it held all 4 of us w/out any moans.

Again thanks for the feedback.

Doug