Tools, Sharpening and Power Machinery - sears 10' radial saw

I have been given a sears 10' radial arm saw model no, 113.197602. the person that gave it to me has taken the relay and capacitor out and did not label the wires. I cannot get anyone at sears that can help me. If anyone has a saw like this i hope you can help.The relay has five spades I know which two wires go to the left side and i know which three go to the right side. i don't which goes on top and which on bottom. i would greatly appreciate any help.

I believe this unit is an Emerson, so try contacting them.

If not, try the Sears website to see if it will give you a breakdown of parts. Maybe the diagram will jar your memory.

http://www.sears.com and then click on parts. Add the model # in and it should give you the breakdown of the parts for it.

Good luck.

Joe thanks a lot for reply. Sears is no help all. Even their repair and service dept. can't or won't help. I contacted emerson and they are trying to find something. Thanks again Fletch

Ya, but I'm telling ya their website with regard to parts breakdowns is excellent. Forget many of the retail stores or even their Parts Direct line. The line is only good if you want to order parts. And you better have the model # or they're lost. On one of my old tool chests, all I had was the catalog # and they couldn't do anything with that. Yet, no where on the tool chest was their part/model number!!!

:)

I have figured out how many a Sears appliance goes back together by looking at those exploded views online!

Maybe there's something there that will get you going.

Good luck.