Gas and Oil Home Heating Furnaces - blower keeps on blowing
Doityourself.com community forum was created to provide answers to all questions related to home improvement and home repair. Doityourself community can help you find information about how-to topics on small fixes to large remodeling projects. With comprehensive how-to content and expertly moderated community forums DoItYourself.com makes it easy to tackle even the most complex home improvement projects.View Full Version : blower keeps on blowing
04-19-01, 10:42 PM
Carrier gas pack (natural gas/ac/blower all outside) 5 ton model 48NHT036300....
OK, problem just started this afternoon when I turned the air off. After a while I noticed that the blower was still on. The blower keeps running when thermostat is off and on auto mode. So I disconnected all wires from thermostat and the problem remains. Then I disconnected thermostat wires from the cir. board on the unit and still the blower runs. Assuming that the relay is stuck or something, is there a method to "un-stick" it? Or is it best to just install a new one?
It appears to be mounted on a small board that is connected to the main cir. board, so will I have to get that board in order to get a new relay?
Thanks for any help!
OK, problem just started this afternoon when I turned the air off. After a while I noticed that the blower was still on. The blower keeps running when thermostat is off and on auto mode. So I disconnected all wires from thermostat and the problem remains. Then I disconnected thermostat wires from the cir. board on the unit and still the blower runs. Assuming that the relay is stuck or something, is there a method to "un-stick" it? Or is it best to just install a new one?
It appears to be mounted on a small board that is connected to the main cir. board, so will I have to get that board in order to get a new relay?
Thanks for any help!
PDF
04-20-01, 03:33 PM
You could install a relay external to the board.You would have to rewire the unit.However.Since the board is showing a circuit problem at this time,it is only a matter of time that you loose another board function.Board replacement is inevitable.PDF