Air Conditioning - Help Fan Blower Runs constantly on or Off !!!
Doityourself.com community forum was created to provide answers to all questions related to home improvement and home repair. Doityourself community can help you find information about how-to topics on small fixes to large remodeling projects. With comprehensive how-to content and expertly moderated community forums DoItYourself.com makes it easy to tackle even the most complex home improvement projects.View Full Version : Help Fan Blower Runs constantly on or Off !!!
bluelatin
11-04-09, 04:31 PM
Hey gang, first of all thank you to all who answers.
Now my problem: Got an old package unit Heil Model PH5530AKA3 a/c and heat works fine but fan blower continues to run even when unit is off!!
Could it be the relay? and if it is how do I find out what kind to replaced with since unit is pretty old.
Once again, thank you in advance
Blue :wall:
PS: saw a post similar to this but fan stays on even after tripping braker
Now my problem: Got an old package unit Heil Model PH5530AKA3 a/c and heat works fine but fan blower continues to run even when unit is off!!
Could it be the relay? and if it is how do I find out what kind to replaced with since unit is pretty old.
Once again, thank you in advance
Blue :wall:
PS: saw a post similar to this but fan stays on even after tripping braker
GRIMKNOTME
11-04-09, 05:42 PM
Most likely stuck fan relay or sequencer what ever it came with...........................................
bluelatin
11-04-09, 05:47 PM
I will check it, and do I need to replace relay?
Thanks,
Blue:wall:
Thanks,
Blue:wall:
GRIMKNOTME
11-06-09, 01:43 AM
I will check it, and do I need to replace relay?
Thanks,
Blue:wall:
If its a stand alone relay or seq. you should have 24+- valts coming into it only when fan called for
If it a control board same way but factory sealed = new board
CK and reply
Thanks,
Blue:wall:
If its a stand alone relay or seq. you should have 24+- valts coming into it only when fan called for
If it a control board same way but factory sealed = new board
CK and reply