Pools, Spas and Hot Tubs - Pool pump needs priming before every turn on

Doityourself.com community forum was created to provide answers to all questions related to home improvement and home repair. Doityourself community can help you find information about how-to topics on small fixes to large remodeling projects. With comprehensive how-to content and expertly moderated community forums DoItYourself.com makes it easy to tackle even the most complex home improvement projects.



PDA
nando11211
10-19-09, 10:05 PM
What should I look for in order to fix this problem? I have to prime the pool pump myself every time and then manually turn it on. Is this common?

todrut
10-20-09, 02:34 PM
There is an air leak some where in your line or pump. When pump is on and primed, turn pump off and watch all around pump lid, fittings, ect and see if water sprays out a little.
nando11211
10-21-09, 12:14 PM
Hmmm... thanks, will do when I get home.

Does an air leak necessarily mean that there is a water leak as well?

todrut
10-21-09, 12:37 PM
not necessarily if it is near the pump and it is on the suction side it will pull air but only when you shut it off you might see a little leak from pressure built up. good luck