All Trucks, Campers, Trailers, RV's and Motor Homes - hard to shift into gear and revers grindes

Doityourself.com community forum was created to provide answers to all questions related to home improvement and home repair. Doityourself community can help you find information about how-to topics on small fixes to large remodeling projects. With comprehensive how-to content and expertly moderated community forums DoItYourself.com makes it easy to tackle even the most complex home improvement projects.



PDA
sphinxx187
10-19-09, 09:27 PM
hello, I just replaced a clutch plate on a 89 mazda b2200. I got everything put together but now it's hard to shift into gears, almost got to force it in 1st and 2nd gears, and when I try to put into reverse it grinds really bad, but does go in gear. and yes I have fluids in there. please help!!!!!:madhell:

newtofta
10-19-09, 09:40 PM
previous -experience,most comon-1st-air in hyd. clutch assy
2 nd-clutch-disk(friction material) installed ,incorectly,-'wrong face'to fly wheel.
sphinxx187
10-19-09, 09:49 PM
previous -experience,most comon-1st-air in hyd. clutch assy
2 nd-clutch-disk(friction material) installed ,incorectly,-'wrong face'to fly wheel.

Hi! thanx for helping again.

I am for sure that I installed the disk correctly. "air in hyd" : do I need to bleed to clutch fluid again? possibly? I did do it by my self pressing to clutch peddle with a bar wile I bleed:(:D