Electronic Alarms and Home Security Devices - Pls Pls HELP Programming NEW sensors, 1 wireless KEYPAD w/ PROTECTION ONE

Please HELP, I had a new system installed by PROTECTION ONE on March 09. The tech told me to buy whatever sensors I need and keypads and he would come back to program them for me. Needless to say, he say YES, YES but somehow just flaked on me. I am now stuck with 5 wireless glass breakage, 3 motion, 1 alpha numeric key pad. Protection ONE is not very helpful. THEY WANT ME TO BUY THEIR equipment which is approx 220 per sensor including installation, which is a rip off b/c the sensor is about $50. I have a resource who can program the system but he says I need something called PROGRAMMING CODE for Protection One. Can any please please help me. I am willing to compensate you for your time and effort. Thank you so much for looking........Michael @ Las Vegas.

(Please do not post email addresses on open forums, it attracts spambots... Mod.)

Need some model numbers. Inside your main control cabinet should be the madel number for the panel and behind the keypad should also be a model number. If its protection 1 then its probally a ademco vista panel with a 6100 series type keypads. also need the transmiters model numbers. Need more info. good luck.

You should have a 320P1 control panel. If it has wireles then it has a 6150PL2 keypad. This keypad supports panels maximum zones. Call and explain your situation to the service manager and see what they say.

Thank you..I will look inside the panel n then post result. I was told its Ademco Vista 20

320P1 is a Vista 20P branded for P1

The 320P1 is a Vista 20p (the suffix is important) slightly modified for Protection One.

If you look in the sticky titled "Alarm Forum FAQ: Please read before posting" you will find the procedure to access programming and extract the installer code.

It _is_ possible that P1 locked out local programming access, but it's unlikely.

Press 4850 + 800 to enter programming.

Hi where can you buy these spare sensors ,I wish buy 9 wireless glass breakage sensor and have a ADT alarm set up
can you advice .








Please HELP, I had a new system installed by PROTECTION ONE on March 09. The tech told me to buy whatever sensors I need and keypads and he would come back to program them for me. Needless to say, he say YES, YES but somehow just flaked on me. I am now stuck with 5 wireless glass breakage, 3 motion, 1 alpha numeric key pad. Protection ONE is not very helpful. THEY WANT ME TO BUY THEIR equipment which is approx 220 per sensor including installation, which is a rip off b/c the sensor is about $50. I have a resource who can program the system but he says I need something called PROGRAMMING CODE for Protection One. Can any please please help me. I am willing to compensate you for your time and effort. Thank you so much for looking........Michael @ Las Vegas.

(Please do not post email addresses on open forums, it attracts spambots... Mod.)

"Honeywell/Ademco 5800 series wireless devices" are what you want to search for.