Tools, Sharpening and Power Machinery - Proxxon Compound table KT 150 Set Up
Doityourself.com community forum was created to provide answers to all questions related to home improvement and home repair. Doityourself community can help you find information about how-to topics on small fixes to large remodeling projects. With comprehensive how-to content and expertly moderated community forums DoItYourself.com makes it easy to tackle even the most complex home improvement projects.View Full Version : Proxxon Compound table KT 150 Set Up
Dave Lister
10-18-09, 11:03 PM
Hi There
I have purchased a Proxxon Compound table KT 150,for use with aProxxon BFB 2000 drill press and find that the KT150 handles are pretty slack. In the respects that there seems to be a fair bit of backlash before it engages.
Moving backwards is ok but moving forwards is where the thing gives most trouble.Using the coarse handle is relatively good no problem with movement, but find the smaller rotating handles next to useless. Have i missed some kind of setup option somewhere or is
there a way to fix this mess. Looking forward to some help as this is all pretty new to me.
Dav;)e
I have purchased a Proxxon Compound table KT 150,for use with aProxxon BFB 2000 drill press and find that the KT150 handles are pretty slack. In the respects that there seems to be a fair bit of backlash before it engages.
Moving backwards is ok but moving forwards is where the thing gives most trouble.Using the coarse handle is relatively good no problem with movement, but find the smaller rotating handles next to useless. Have i missed some kind of setup option somewhere or is
there a way to fix this mess. Looking forward to some help as this is all pretty new to me.
Dav;)e