All Trucks, Campers, Trailers, RV's and Motor Homes - 94 chevy silvarado 1500
Doityourself.com community forum was created to provide answers to all questions related to home improvement and home repair. Doityourself community can help you find information about how-to topics on small fixes to large remodeling projects. With comprehensive how-to content and expertly moderated community forums DoItYourself.com makes it easy to tackle even the most complex home improvement projects.View Full Version : 94 chevy silvarado 1500
chevyman14
10-13-09, 02:14 PM
im trying to tak the main wiring harness of a 94 silvardo i got it all except were it goes back into the firewall at the drivers side and i cant figure out how to get it out. do i have to go inside the dash to take it out?
Mr. Fix It
10-15-09, 07:55 PM
There should be two clips one on each side of the terminals.
Usually they are sealed with a Dielectric grease or a heavy tar to keep out moisture. So it is kind of hard to pull out.
Some others has a bolt that goes through the middle of the terminal block. Either 8 or 10 mm headed.
On the inside of the truck usually the fuse block is held to the body with as many as 4 screws that screws directly into the firewall. While others are held in with nothing but the same squeeze clips.
If you don't mind me asking, why are you removing the harness?
Usually they are sealed with a Dielectric grease or a heavy tar to keep out moisture. So it is kind of hard to pull out.
Some others has a bolt that goes through the middle of the terminal block. Either 8 or 10 mm headed.
On the inside of the truck usually the fuse block is held to the body with as many as 4 screws that screws directly into the firewall. While others are held in with nothing but the same squeeze clips.
If you don't mind me asking, why are you removing the harness?