Electronic Alarms and Home Security Devices - Ge Concord4 Output Relay

I have a GEconcord4 that I have an output relay hooked to one of the keypads.

I am trying to enter a number into the keypad to fire one of the relays (to open the garage door).

I received the following instructions: "to use the keypads, program the output with a configuration number of 00000. You also need to name the output under OUTPUT TEXT for the output you wired it to...after doing that, you hit 77+whatever the output number is. For example, if you use the first output on the relay board, you would hit 773 at the keypad, if it's the second relay, you hit 774 and so on...
"

I cant find anywhere in the OUTPUT section it will let me enter an OUTPUT TEXT. In the manual they have that under snapcards, but not under accessory modules.

Can anyone explain to me how I would program this so that I can hit a sequence of numbers on the keypad to fire individual relays that I have my garage doors hooked up to?

Thanks much
bdo

What specific keypad model do you have?

I have two keypads. The ATP1000 and a GE-600-1020


The model number is 60-770 - for the 4 output relay superbus 2000 module.

Thanks