Home Automation - Remove unit from old Nutone intercom

Doityourself.com community forum was created to provide answers to all questions related to home improvement and home repair. Doityourself community can help you find information about how-to topics on small fixes to large remodeling projects. With comprehensive how-to content and expertly moderated community forums DoItYourself.com makes it easy to tackle even the most complex home improvement projects.



PDA
MBLyle
09-28-09, 02:30 PM
I need to remove one of the substation units from my very old (30 yr +) Nutone intercom system. It's in the way of new cabinets being installed. Is there a wiring diagram for these old units anywhere? Can I just hopefully connect the appropriate wires together as if it was an uninterrupted run, push back into the wall, and cover the hole?

Sure appreciate some help!

Martha

goldstar
09-28-09, 05:53 PM
Check the master station. You will probably find a separate group of wires for each substation. If this is the case, you can simply remove the sub and rough in box and cap off the wires in the wall. You could also remove that stations wires at the master for a totally dead circuit.