Entertainment Center: TVs, Stereos, VCRs and DVDs - Infocus X1 DLP Projector

Doityourself.com community forum was created to provide answers to all questions related to home improvement and home repair. Doityourself community can help you find information about how-to topics on small fixes to large remodeling projects. With comprehensive how-to content and expertly moderated community forums DoItYourself.com makes it easy to tackle even the most complex home improvement projects.



PDA

View Full Version : Infocus X1 DLP Projector

Kazuano
09-25-09, 11:03 AM
I have an Infocus X1 DLP Projector that I unfortunately dropped on the floor. It still functions except that I can only use the RCA jack to input video. The computer and s-video in jacks are non-functional due to the circuit board being broken in that area. So, what I need is a replacement I/O ECA board, part number 510-1800-xx. Infocus says they no longer manufacture parts for the X1. Anyone on this board have access to this part OR a non-functional X1 they would be willing to part out?

Thanks
Kaz

Rick Johnston
09-25-09, 05:52 PM
What are the chances of re-soldering the traces on the PC board? Use some fine sandpaper or 000 steel wool to remove the coating (and make sure you get every stray piece of wool off!). Use stripped Cat5 wires to make the connections.
Kazuano
09-26-09, 08:16 AM
For someone with the proper skills re-soldering the traces may be possible. For me, it would be a great challenge.