Carpentry and Woodworking - problem with my planer
Doityourself.com community forum was created to provide answers to all questions related to home improvement and home repair. Doityourself community can help you find information about how-to topics on small fixes to large remodeling projects. With comprehensive how-to content and expertly moderated community forums DoItYourself.com makes it easy to tackle even the most complex home improvement projects.View Full Version : problem with my planer
mikiel
09-11-09, 05:39 PM
it's a delta mod# 22-560 and it just started making an awful noise over night. worked fine yesterday, sounds like death today.
it sounds like the safety lever is up but i dissasembled it so i can see where that lock catches and it is clear. is it possible that a bad bering would make the same noise? (i am familiar with the noise because i've seen somebody dissasemble thier machine and try running it without depressing the lever or removing the lock)
it sounds like the safety lever is up but i dissasembled it so i can see where that lock catches and it is clear. is it possible that a bad bering would make the same noise? (i am familiar with the noise because i've seen somebody dissasemble thier machine and try running it without depressing the lever or removing the lock)
Just Bill
09-12-09, 04:45 PM
On occasionas, things get stuck in the drive components, and generally make lots of noise, as you know. You may have to disassemble the tool further, but it is usually not bad bearings. Once all the guards (plastic) is off, all the drive components are usually visible and you should be able to find the culprit. But as I said, more disassembly may be needed.