Thermostatic Controls - Weathertron to honeywell help
Doityourself.com community forum was created to provide answers to all questions related to home improvement and home repair. Doityourself community can help you find information about how-to topics on small fixes to large remodeling projects. With comprehensive how-to content and expertly moderated community forums DoItYourself.com makes it easy to tackle even the most complex home improvement projects.View Full Version : Weathertron to honeywell help
james32246
09-09-09, 10:46 AM
I currently have a weathertron thermostat and i'm trying to put in a programable honeywell. I have to many wires and not sure which go where.
Old wires:
G
Y
X2
B
T
R
W which was same wire hooked to X2
New Thermostat only has:
Rh
Rc
W
Y
G
I tried R to Rc jumpered to Rh
Y to Y
G to G
W to W
the outside unit kicks on in auto but the air is not cool
when you put fan to on position the outside unit doesn't come on.
someone help
Old wires:
G
Y
X2
B
T
R
W which was same wire hooked to X2
New Thermostat only has:
Rh
Rc
W
Y
G
I tried R to Rc jumpered to Rh
Y to Y
G to G
W to W
the outside unit kicks on in auto but the air is not cool
when you put fan to on position the outside unit doesn't come on.
someone help
Jay11J
09-10-09, 07:36 AM
I'm afraid you got the wrong t-stat. What's the model # on the new t-stat?
You will need to get the RTH7500 or RTH7600 model lines to work with your heat pump system.
Do you have an extra wire that is not used.
You will need to get the RTH7500 or RTH7600 model lines to work with your heat pump system.
Do you have an extra wire that is not used.