Outdoor Power Equipment and Small Engines - Mower belt keeps slipping off

Doityourself.com community forum was created to provide answers to all questions related to home improvement and home repair. Doityourself community can help you find information about how-to topics on small fixes to large remodeling projects. With comprehensive how-to content and expertly moderated community forums DoItYourself.com makes it easy to tackle even the most complex home improvement projects.



PDA

View Full Version : Mower belt keeps slipping off

Mark N
09-05-09, 01:10 PM
Craftsman 46" Deck Model 917273070

The mower belt keeps slipping off, like every two-three minutes. I don't think, but not sure, if this model has a tension adjustment device. Could it just be an old belt, or should I troubleshoot something else before I spring for the new belt ($35)? (The belt does look somewhat old).

Thank You

goldstar
09-05-09, 01:40 PM
Two things will usually cause a belt to come off. One, too loose. Check it by hand with the motor off but the mower drive engaged. If you can pull it more then an inch or so beyond it's normal alignment, it either needs adjusting - if that's possible, or replacement.
Two, one or more pulleys may be misaligned. You would probably need a service shop for proper repairs.
Airman
09-06-09, 07:43 AM
There are no belt tension adjustments for deck belt. Belt tension is maintained by springs attached to the idler pulleys. Inspect to see if a spring is broken, if not the belt just may be at the end of its life.

Owner’s manual with parts list:
http://www.managemyhome.com/mmh/lis_pdf/OWNM/L0010525.pdf