Walls and Ceilings - Opening up a load bearing wall

Doityourself.com community forum was created to provide answers to all questions related to home improvement and home repair. Doityourself community can help you find information about how-to topics on small fixes to large remodeling projects. With comprehensive how-to content and expertly moderated community forums DoItYourself.com makes it easy to tackle even the most complex home improvement projects.



PDA

View Full Version : Opening up a load bearing wall

mark_ksz
09-01-09, 08:14 AM
Hello,

I have been looking online about opening up a load bearing wall. But all I can find is how to completely remove one. I am just trying to create a kitchen bar between my kitchen and living room. Here is a link to an image of what I am trying to do. http://img.hgtv.com/HGTV/2008/05/09/hdswt406_1cb_BreakfastBar_AFTER_lg.jpg
I wanted to know what you thought I should do about installing the support beam. This is on a ranch so there is no second floor but we do get snow. I am looking to make an 8ft opening. I don't want to tear down the whole wall I am hoping there is a way I can cut out the whole and install the beams under the existing studs. Any help will be greatly appreciated.

Thanks.

GBR in WA
09-01-09, 11:59 AM
So just a roof above.
1. Why is it load bearing?

2. Are the ceiling joists ending on it?

3. Is part of the roof framing bearing on it?

4. Are the floor joists under it doubled? Or a row of blocks in-line with wall below?

Be safe, G