Kitchen Gas Appliances - Maytag Gas Dryer No Heat
Doityourself.com community forum was created to provide answers to all questions related to home improvement and home repair. Doityourself community can help you find information about how-to topics on small fixes to large remodeling projects. With comprehensive how-to content and expertly moderated community forums DoItYourself.com makes it easy to tackle even the most complex home improvement projects.View Full Version : Maytag Gas Dryer No Heat
mktbully
08-30-09, 09:08 PM
Maytag model number: ldg9606aae
Part replaced: thermal switch
Parts checked for continuity (all pass):
coils
igniter
tstat hi limit
radiant sensor
thermal switch
thermostat multi temp
Parts check for voltage:
ignitor...only around 28 volts when trying to warm up..shouldn't it be 110 or something?
ignitor doesn't glow at all...i don't smell gas
Is it the timer? any way to test this part? it's coming in around 80 bucks so i want to make sure. when i set it to timed drying i can hear to tick or buss that it's moving.
hope i provided all the necessary info. any helps or comments are appreciated.
thanks!
Dan
Part replaced: thermal switch
Parts checked for continuity (all pass):
coils
igniter
tstat hi limit
radiant sensor
thermal switch
thermostat multi temp
Parts check for voltage:
ignitor...only around 28 volts when trying to warm up..shouldn't it be 110 or something?
ignitor doesn't glow at all...i don't smell gas
Is it the timer? any way to test this part? it's coming in around 80 bucks so i want to make sure. when i set it to timed drying i can hear to tick or buss that it's moving.
hope i provided all the necessary info. any helps or comments are appreciated.
thanks!
Dan
Sharp Advice
09-01-09, 06:12 AM
Hello Dan. Welcome to the Gas Appliances topic.
Based upon the problem description, ho heat and the low voltage to the glow igniter, I would be inclined to suspect the igniter to be the most likely problem.
Far less expensive and easier to replace then a timer control. The igniter is the most common cause and the part often does not last more then a few years, based upon normal usage.
Very difficult, if not impossible to accurately determine the timer control as a the exact problem cause. But it could very well be the sole cause. I highly suggest replacing the igniter as the first step in resolving the problem.
More details and info here: Dryer help sticky note: >Dryer Information + *Fuel Conversion*< Info Contained Here< - DoItYourself.com Community Forums (http://forum.doityourself.com/showthread.php?t=159481)
Retail appliance parts dealers can also help determine what the most likely possible problem may be. They will need the make, model and serial numbers. Appliance parts dealers are an excellent source for original replacement parts and problem resolving matters. Dealers are listed in the phone book under appliances.
Be sure the electrical power to the appliance is turned off, before attempting any repairs or services. Always check for gas leaks whenever moving the appliance and/or a service or repair includes any connection of a gas part.
Read the existing questions on the subject of dryers. Doing so will more quickly provide you with answers to questions & provide additional information on how to resolve dryer problems.
Use the reply button to add additional information or questions. Using the reply button keeps or moves the topic back up to the top of the list automatically and keeps all communications on this subject in this thread.
Web Site Host, Forums Manager, Moderator Hiring and Promotions Agent, Gas Appliances Topic Moderator, Multiple Forums Moderator & Natural Gas Appliance Diagnostics Technician.
DRYER SERVICE TIP:
It's always advisable to clean the entire exhaust venting system every 2 years. Or during any dryer maintenance, replacement and or repairs.
Based upon the problem description, ho heat and the low voltage to the glow igniter, I would be inclined to suspect the igniter to be the most likely problem.
Far less expensive and easier to replace then a timer control. The igniter is the most common cause and the part often does not last more then a few years, based upon normal usage.
Very difficult, if not impossible to accurately determine the timer control as a the exact problem cause. But it could very well be the sole cause. I highly suggest replacing the igniter as the first step in resolving the problem.
More details and info here: Dryer help sticky note: >Dryer Information + *Fuel Conversion*< Info Contained Here< - DoItYourself.com Community Forums (http://forum.doityourself.com/showthread.php?t=159481)
Retail appliance parts dealers can also help determine what the most likely possible problem may be. They will need the make, model and serial numbers. Appliance parts dealers are an excellent source for original replacement parts and problem resolving matters. Dealers are listed in the phone book under appliances.
Be sure the electrical power to the appliance is turned off, before attempting any repairs or services. Always check for gas leaks whenever moving the appliance and/or a service or repair includes any connection of a gas part.
Read the existing questions on the subject of dryers. Doing so will more quickly provide you with answers to questions & provide additional information on how to resolve dryer problems.
Use the reply button to add additional information or questions. Using the reply button keeps or moves the topic back up to the top of the list automatically and keeps all communications on this subject in this thread.
Web Site Host, Forums Manager, Moderator Hiring and Promotions Agent, Gas Appliances Topic Moderator, Multiple Forums Moderator & Natural Gas Appliance Diagnostics Technician.
DRYER SERVICE TIP:
It's always advisable to clean the entire exhaust venting system every 2 years. Or during any dryer maintenance, replacement and or repairs.