Thermostatic Controls - Changing from old honeywell to WR 1F85-0471
Doityourself.com community forum was created to provide answers to all questions related to home improvement and home repair. Doityourself community can help you find information about how-to topics on small fixes to large remodeling projects. With comprehensive how-to content and expertly moderated community forums DoItYourself.com makes it easy to tackle even the most complex home improvement projects.View Full Version : Changing from old honeywell to WR 1F85-0471
kalebson
08-15-09, 01:34 PM
I am replacing my old thermostat, the wiring is as follows:
green wire > G terminal
blue wire > Y terminal
white wire > W terminal
red wire > R terminal
there is a jumper between the r's as well
I am replacing this with a white-rodgers 1F85-0471..which I can not contact on Saturday..thought might get some help here
should i use the same terminals on the white rodgers? the wiring diagram in the installation instructions are very vague. appreciate any help.
green wire > G terminal
blue wire > Y terminal
white wire > W terminal
red wire > R terminal
there is a jumper between the r's as well
I am replacing this with a white-rodgers 1F85-0471..which I can not contact on Saturday..thought might get some help here
should i use the same terminals on the white rodgers? the wiring diagram in the installation instructions are very vague. appreciate any help.
Jay11J
08-16-09, 07:06 PM
Yes, you can use the same wires to match on the new T-stat's letter.