Electronic Alarms and Home Security Devices - Admeco 6270 wont arm in AWAY mode

Doityourself.com community forum was created to provide answers to all questions related to home improvement and home repair. Doityourself community can help you find information about how-to topics on small fixes to large remodeling projects. With comprehensive how-to content and expertly moderated community forums DoItYourself.com makes it easy to tackle even the most complex home improvement projects.



PDA

View Full Version : Admeco 6270 wont arm in AWAY mode

kmayo
08-10-09, 07:02 PM
Hello; I have a Vista 20P ver7 with a 6160 and a 6270. I just noticed when arming the alarm from the 6270 in AWAY mode after the exit timer (45 seconds) it arms in STAY mode. I cannot get it to arm in AWAY mode from the 6270 keypad. It works fine from the 6160? Any ideas?

MrRonFL
08-10-09, 07:04 PM
Open and close an entry/exit zone. The auto-stay is intended to prevent people from arming the system, then tripping their own motion detectors.
kmayo
08-10-09, 07:06 PM
Can the Auto-Stay be disabled?

MrRonFL
08-10-09, 09:06 PM
In system progamming:
*84 0
kmayo
08-11-09, 12:29 PM
You Rock! Works like a champ.
Thanks