Electronic Alarms and Home Security Devices - ADEMCO Vista 20P Motion Detector Issue

Doityourself.com community forum was created to provide answers to all questions related to home improvement and home repair. Doityourself community can help you find information about how-to topics on small fixes to large remodeling projects. With comprehensive how-to content and expertly moderated community forums DoItYourself.com makes it easy to tackle even the most complex home improvement projects.



PDA
sk_kushwaha
08-09-09, 03:30 PM
Hi Guys,

I recently installed Ademco vista 20p in my house. I got everything working except for the motion detector. The motion detector works fine if I change its zone type to 03 (perimeter). But if I set it to 04(interior follower) it doesn't sound the alarm. I know its hooked up properly and the LEDs blink when I move around. But for some reason, it doesn't sound the alarm when its zone type is set to 04.

Any idea what could be wrong?

Thanks for your time,
Sundeep

PRO1 TECH
08-09-09, 05:32 PM
Hi Guys,

I recently installed Ademco vista 20p in my house. I got everything working except for the motion detector. The motion detector works fine if I change its zone type to 03 (perimeter). But if I set it to 04(interior follower) it doesn't sound the alarm. I know its hooked up properly and the LEDs blink when I move around. But for some reason, it doesn't sound the alarm when its zone type is set to 04.

Any idea what could be wrong?

Thanks for your time,
Sundeep

how are arming the system if away did you open the door then close the door if not it will go in to stay mode uless you go to *84 put 0 *99
sk_kushwaha
08-09-09, 06:37 PM
Thanks. That did the trick. It was driving me nuts :-)

-Sundeep