Landscaping - Air Compressor Size
Doityourself.com community forum was created to provide answers to all questions related to home improvement and home repair. Doityourself community can help you find information about how-to topics on small fixes to large remodeling projects. With comprehensive how-to content and expertly moderated community forums DoItYourself.com makes it easy to tackle even the most complex home improvement projects.View Full Version : Air Compressor Size
kolias
08-08-09, 09:35 PM
Five years ago I had a 6 zone underground sprinkler system installed. The components are made by Rain Bird.
All is working fine but at the end of each season I have to pay $100.00 to blow the system dry for the winter, a 10 minutes job by the contractor.
I do have right now a small air compressor in my workshop (2 gallons, 100 psi) which I’m planning to change anyway. How big of a compressor do I need for this job? If I do one zone at a time it should not be too big.
Nicolas
All is working fine but at the end of each season I have to pay $100.00 to blow the system dry for the winter, a 10 minutes job by the contractor.
I do have right now a small air compressor in my workshop (2 gallons, 100 psi) which I’m planning to change anyway. How big of a compressor do I need for this job? If I do one zone at a time it should not be too big.
Nicolas
GregH
08-09-09, 07:07 AM
The compressor you have now says two hp but it likely is not.
If a manufacturer were honest about capacity ratings you would find that the largest capacity compressor you can operate on a normal 115 volt, 15 amp circuit is 5-6 cfm @ 100psi which more reliable makers will show as 2 hp.
Because of this your choice will be fairly simple.
Just look for a compressor in this cfm capacity in a style that you like.
For blowing out sprinklers cfm capacity is important but a large tank size helps as well.
We do not promote any particular brand here but IMO this CH unit is one of the best values in a homeowner compressor unit.
The cast irom pump and belt drive if looked after make for a very long lasting unit.
More compressor info.
(http://forum.doityourself.com/tools-sharpening-power-machinery/131654-air-compressor-information.html)
Cliick image:
http://www.chpower.com/chimages/ProductLarge/VT6290_large.jpg (http://www.chpower.com/webapp/wcs/stores/servlet/chPrd3_10051_10001_93983_-1_10646_10692_)
Image courtesy of chpower.com
If a manufacturer were honest about capacity ratings you would find that the largest capacity compressor you can operate on a normal 115 volt, 15 amp circuit is 5-6 cfm @ 100psi which more reliable makers will show as 2 hp.
Because of this your choice will be fairly simple.
Just look for a compressor in this cfm capacity in a style that you like.
For blowing out sprinklers cfm capacity is important but a large tank size helps as well.
We do not promote any particular brand here but IMO this CH unit is one of the best values in a homeowner compressor unit.
The cast irom pump and belt drive if looked after make for a very long lasting unit.
More compressor info.
(http://forum.doityourself.com/tools-sharpening-power-machinery/131654-air-compressor-information.html)
Cliick image:
http://www.chpower.com/chimages/ProductLarge/VT6290_large.jpg (http://www.chpower.com/webapp/wcs/stores/servlet/chPrd3_10051_10001_93983_-1_10646_10692_)
Image courtesy of chpower.com
TheCaptain
08-09-09, 07:55 AM
Do not exceed the PSI of your pipe in the ground or you will cause damage to it. What you want is something with a high CFM rating (cubic feet per minute) at a lower PSI, say around 70-80 PSI max.
Get the highest CFM in your market range.
Get the highest CFM in your market range.
kolias
08-09-09, 12:58 PM
This confirms pretty much what I had in my mind.
Thank you both for your time
Nicolas
Thank you both for your time
Nicolas