Framing and Sub-Flooring - cathedral ceilng on workshop

Doityourself.com community forum was created to provide answers to all questions related to home improvement and home repair. Doityourself community can help you find information about how-to topics on small fixes to large remodeling projects. With comprehensive how-to content and expertly moderated community forums DoItYourself.com makes it easy to tackle even the most complex home improvement projects.



PDA

View Full Version : cathedral ceilng on workshop

bosoxfever
07-31-09, 09:32 AM
I'm building a 8' x 15' workshop. the roof is 8/12. would two 2x10s glued and screwed work as ridge beam? what would you suggest for rafter size? i was thinking 2x6 24oc. also each 8' end wall has a 4' window on center. i'm planning to bring a 4x4 support post from beam to a 2x10 header supported by 4x4 trimmers. any suggestion?
I live in coastal northern California

Pulpo
08-01-09, 06:42 AM
You really need to get the building codes for you area. Apparently, you are building it without a permit which could give you problems if you decide to sell the house someday.
Jack the Contractor
08-01-09, 08:48 AM
Yes, your ridge beam will work just fine. You have a very strong structure planned. You should check with your local zoning or codes, but they should not have problem with them. Good Luck