Garages and Carports - Building a sectional gagrage door

Doityourself.com community forum was created to provide answers to all questions related to home improvement and home repair. Doityourself community can help you find information about how-to topics on small fixes to large remodeling projects. With comprehensive how-to content and expertly moderated community forums DoItYourself.com makes it easy to tackle even the most complex home improvement projects.



PDA

View Full Version : Building a sectional gagrage door

disciple777
07-22-09, 12:16 PM
I have a garage door (sectional) that needs replacing, I want to use existing measurements. Is this a hard DYI project? What tools do I need?
Thanks,
disciple777:wall:

Just Bill
07-22-09, 04:31 PM
Since you are asking, you obvioulsy have no concept of the project you wish to undertake. Norm even left that to others. But to answer the question.......a really good cabinet saw with an out feed table, a big HP router or similar, lots of clamps, and the list goes on. But custom doors are VERY expensive, so it might be worth investing in some tools.
chandler
07-22-09, 09:30 PM
I have the equipment in my shop that would allow me to build doors like that, but wouldn't touch it with a very long pole. By the time I routed the drip front and mating lower door part, I'd have more time and materials in it than it would be worth, and I could buy a door cheaper. If your opening is more or less standard in size, look into purchasing a replacement.

disciple777
07-24-09, 01:30 PM
Thanks Chandler et JustBill....I thought that would be the response...will NOT be building this project.....