Kitchen Large Electric Appliances - How to Acess GE Frig Door dispenser?

Doityourself.com community forum was created to provide answers to all questions related to home improvement and home repair. Doityourself community can help you find information about how-to topics on small fixes to large remodeling projects. With comprehensive how-to content and expertly moderated community forums DoItYourself.com makes it easy to tackle even the most complex home improvement projects.



PDA
ineedheat
07-10-09, 08:58 AM
GE Profile Frig model PSI23SGPABS side by side. How do I gain access to the freezer door ice dispenser assembly (the door side)? I need to replace a round rubber and foam gasket/dispenser hole seal that fell off. It would be an extremely easy task, except I have run out of miniature people to climb up the hole to snap it into place. I’m assuming the answer will involve a major door renovation

Thanks.

applianceman
07-12-09, 08:15 PM
Under the bottom of the dispenser panel you should see a crack. Insert a screwdriver in that crack and prize the panel off. Once off unplug the wires and remove the four screws that hold the housing on. Once all this is done you should be able to access the flap. Hope this helps! Refrigerator repair guide (http://www.appliance-repair-it.com/Refrigerator-repair.html)
ineedheat
07-13-09, 11:24 AM
Thanks - I was afraid to break it I guess. It came off with out effort. Mine had a second panel to remove and 4 screws. Took all of 5 minutes....Many Thanks