Tools, Sharpening and Power Machinery - Bolt cutter design

Doityourself.com community forum was created to provide answers to all questions related to home improvement and home repair. Doityourself community can help you find information about how-to topics on small fixes to large remodeling projects. With comprehensive how-to content and expertly moderated community forums DoItYourself.com makes it easy to tackle even the most complex home improvement projects.



PDA

View Full Version : Bolt cutter design

davelew
06-20-09, 01:14 AM
Does anyone know what is the difference between 36" bolt cutters that has a small lever arm on one of the handles vs. ones that does not have this extra lever arm. Thanks

spdavid
06-20-09, 08:41 AM
Pic would help but I'm guessing the extra arm design is a ratchet bolt cutter which would give you extra leverage to cut thicker or harder items.Depending on what you are trying to cut even a 36 in won't do the job example the hardened shackle of a well made padlock like a master if thick enough like around 3/8 in or so won't penetrate by hand action alone and will shatter the jaws of a 36 in set especially an imported set.

Been there done that.