Electronic Alarms and Home Security Devices - Unused zones on a Dsc power 1832

Doityourself.com community forum was created to provide answers to all questions related to home improvement and home repair. Doityourself community can help you find information about how-to topics on small fixes to large remodeling projects. With comprehensive how-to content and expertly moderated community forums DoItYourself.com makes it easy to tackle even the most complex home improvement projects.



PDA

View Full Version : Unused zones on a Dsc power 1832

hookman
06-13-09, 07:14 PM
Just finish planning for connecting the Dsc power 1832. I have only used 6 zones out of 8 zones provided. Do I leave the 7 zone and 8 zone unconnected or do I connect a 56k resistor or a wire from Z7 to com and Z8 to com. How do I stop the zone 7and 8 on keyed lighting up. Thank yyou for the hel

LOCKtec
06-13-09, 08:29 PM
couple ways-

yes, use the 5.6k's then its done

you could also shut them off in programming- a) not selected for any partition. b) zone definition "00"

do the 5.6k and be done with it