Electronic Alarms and Home Security Devices - Program Help for single button arming of Function Keys

Doityourself.com community forum was created to provide answers to all questions related to home improvement and home repair. Doityourself community can help you find information about how-to topics on small fixes to large remodeling projects. With comprehensive how-to content and expertly moderated community forums DoItYourself.com makes it easy to tackle even the most complex home improvement projects.



PDA
dwiniger
06-11-09, 05:41 PM
:coffee:Hi, Looking for help for a newbie to program my "D" button to be a one touch solution to put the system into Night Stay Mode.

Also, my A and B keys are labeled with Fire and Police...how do I confirm that they are "programmed" without activating them?

Thanks,

System Ademco Safe Watch 3000 - Vista 20p

MrRonFL
06-11-09, 06:46 PM
The easiest way to test the keys is to call ADT, tell them you want to test for an hour or so, and send the signals. They will tell you if they got them when you call back to take the system off of test.

The function key programming is the *57 menu mode in programming (in my copy of the manual, page 5-13).

You press the key you want to program, select the partition, then enter the function (night/stay is 05)

When you go back to the key to program prompt, enter 0 to exit that menu.

Don't forget that you need to enter *99 when you leave system programming, or you can lock yourself out.