Motorcycles, Snowmobiles, Go-Carts, ATV's and Golf Carts - Hot wire old snowmobile
Doityourself.com community forum was created to provide answers to all questions related to home improvement and home repair. Doityourself community can help you find information about how-to topics on small fixes to large remodeling projects. With comprehensive how-to content and expertly moderated community forums DoItYourself.com makes it easy to tackle even the most complex home improvement projects.View Full Version : Hot wire old snowmobile
Royalwapiti
06-06-09, 09:01 PM
I took a snowmobile from my father in laws farm. I had intentions of getting it running. It is a 1976 Ski Moto Futura 440.
I don't have a key for it.
The ignition has the following wires, BAT, LITE, GRD, MAG and one unlabeled in the center of the ignition switch.
To hot wire it which wires would I connect or ground out?
Any help appreciated. Thanks
I don't have a key for it.
The ignition has the following wires, BAT, LITE, GRD, MAG and one unlabeled in the center of the ignition switch.
To hot wire it which wires would I connect or ground out?
Any help appreciated. Thanks
CanuckRoy
06-06-09, 10:01 PM
Disconnect the MAG connection and run the wire to a simple on-off switch grounded to the machine. A tether switch with a lanyard on the wrist would also be a good idea. DO NOT feed battery power to the ignition.