Electronic Alarms and Home Security Devices - Ademco 5883 TM Trouble
Doityourself.com community forum was created to provide answers to all questions related to home improvement and home repair. Doityourself community can help you find information about how-to topics on small fixes to large remodeling projects. With comprehensive how-to content and expertly moderated community forums DoItYourself.com makes it easy to tackle even the most complex home improvement projects.View Full Version : Ademco 5883 TM Trouble
JaxJaguar
06-06-09, 03:58 PM
Having difficulty getting my Vista 20P to transmit to wireless keypad (5828V) and wireless siren (5800 Wave). Recently had to reset and reprogram my panel. Prior to that my system was working perfectly x 5 months. Now all my wireless sensors are being read but I can't get the keypad and wireless siren to sync up. I checked the House ID and it matches. I've tried to unenroll the keypad by flipping the dipswitches but still doesn't work. The dipswitches on my 5883H TM are set to off except for #6. Need some help.
MrRonFL
06-06-09, 10:03 PM
hmmm, if you have the house ID in *24 set to match the house ID set on the devices, with the dipswitch settings as described, you should be in business.
You could try resetting the devices, but as described, there shouldn't have been an issue with a control default on the 20p. Other than *24, most of the settings for bidirectional are automatic.
You could try resetting the devices, but as described, there shouldn't have been an issue with a control default on the 20p. Other than *24, most of the settings for bidirectional are automatic.