Solid Hardwood, Engineered and Laminate Flooring - Problem with gaps on engineered wood floor
Doityourself.com community forum was created to provide answers to all questions related to home improvement and home repair. Doityourself community can help you find information about how-to topics on small fixes to large remodeling projects. With comprehensive how-to content and expertly moderated community forums DoItYourself.com makes it easy to tackle even the most complex home improvement projects.View Full Version : Problem with gaps on engineered wood floor
woodfloorfan
06-01-09, 10:26 PM
Glad that I found this site.
Just bought rosewood engineered wood floor. Got a good deal. Tried to install few board and got gaps. Used clamps and even tap them very hard and still resulted with gaps.
Need help.
Just bought rosewood engineered wood floor. Got a good deal. Tried to install few board and got gaps. Used clamps and even tap them very hard and still resulted with gaps.
Need help.
chandler
06-02-09, 05:21 AM
Welcome to the forums! Is it a glue up, click lock, or what type floor is it. What thickness? You can post pictures on a site such as photobucket.com and copy/paste the HTML code to your reply post to let us see what you have.
woodfloorfan
06-02-09, 08:31 AM
Thanks for the reply.
It's toungue and groove floating floor and the board is between 1/2 to 3/4 inch thickness. I even tried to attach two boards together and it seems the toungue is longer than the dept of the groove. Should I sand down the tongue?
It's toungue and groove floating floor and the board is between 1/2 to 3/4 inch thickness. I even tried to attach two boards together and it seems the toungue is longer than the dept of the groove. Should I sand down the tongue?
chandler
06-02-09, 05:58 PM
Pictures..................................