Electronic Alarms and Home Security Devices - admenco system

Doityourself.com community forum was created to provide answers to all questions related to home improvement and home repair. Doityourself community can help you find information about how-to topics on small fixes to large remodeling projects. With comprehensive how-to content and expertly moderated community forums DoItYourself.com makes it easy to tackle even the most complex home improvement projects.



PDA

View Full Version : admenco system

anthonymarjie
05-04-09, 05:11 PM
i just bought a house with an Admenco alarm system. I do not have any codes or manuals. The system started beeping with a BAT code and a FC code flashing. I typed in some numbers and the alarm stopped beeping but the codes are still there. The control panel is wired in the wall and i could not find any battery. will this problem come back and how do i reset the security codes?

MrRonFL
05-04-09, 07:14 PM
FC is "failure to communicate". BAT means that the backup battery in the metal box that holds the actual system motherboard has failed.

It will resound these troubles about once a day until you replace the battery and disable the dialer.

Find the system box, first. The diagram inside the door will tell you what model system this is actually.