Electronic Alarms and Home Security Devices - Exit button "function not available"

Doityourself.com community forum was created to provide answers to all questions related to home improvement and home repair. Doityourself community can help you find information about how-to topics on small fixes to large remodeling projects. With comprehensive how-to content and expertly moderated community forums DoItYourself.com makes it easy to tackle even the most complex home improvement projects.



PDA
thuper
05-04-09, 05:10 PM
Hi folks. I have an older power series ( can't remember if it's 832 or 864) and apparently the exit button is not programmed.

Can someone give me a quick step by step.

I was told to hit *8, installers code, then section 015
Once I do that, all I see is some numbers and hyphens.

Am I on the right track here?

Thanks in advance.

AllTrack
05-04-09, 07:25 PM
After you follow those steps, if three is not on, press three and it should light. Then exit programming. The only other reason it wouldn't work would be that the function button programming is not set. But do the above first.
thuper
05-05-09, 04:06 PM
Thanks AllTrack.....it worked like a charm:thumbup: