Outdoor Power Equipment and Small Engines - Wheel Horse 416 - No power to the switch
Doityourself.com community forum was created to provide answers to all questions related to home improvement and home repair. Doityourself community can help you find information about how-to topics on small fixes to large remodeling projects. With comprehensive how-to content and expertly moderated community forums DoItYourself.com makes it easy to tackle even the most complex home improvement projects.View Full Version : Wheel Horse 416 - No power to the switch
empire47
05-02-09, 09:24 AM
I have a WH 416H that usually runs like a top. I started it today to mow the lawn and it started right up, ran for about 10 minutes and suddenly quit. There were no test lights, nothing and no response to the starter switch. I checked around under the hood, all looked well and tried it again. This time the lights came on and it started right up. Ran for 30 seconds and stopped again. Now it acts like there's no battery in it, no lights nothing. Checked everything again, including the battery and all seems as it should be, but still no test lights or power to the switch. Any ideas?
marbobj
05-02-09, 02:18 PM
Sounds like a fuse, connection, or wire break.
empire47
05-03-09, 07:59 PM
Yep, it was a connection. A single pin in a multi pin connector was losing contact. Took a while to track it down but I cleaned it up and we're back up and mowing. Thanks.
marbobj
05-03-09, 08:31 PM
That would have been a tough one!! Glad you got it.