Electronic Alarms and Home Security Devices - Want to disable digital dialer. VISTA40

Hello
I have an ademco vista 40. I have added a 4285 voice module, and USP voice dialer. Can I disable the digital dialer in the main panel from trying to dial central station.:confused:
Carter.

Just delete the phone numbers in programming by entering *33*, *34*, and *35*.

That should do the trick.

Hi. MrRonFL.
I entered all 0's for all three phone numbers on programming fields *33,*34,and*35. I confirmed this by #33,#34,and#35. Is this the proper way to delete these phone #'s. The alarm still dials central station.
Carter.

Thanks for your advice MrRonFL. I cleared *33*,*34*,and*35. But no results. After a little more research, I tried clearing *32*,and*90* account #'s. Finally the board stopped dialing. Some boards may differ from others I guess. I bought the system back in "95" and finally purchased and installed x-10 transformer,4285 voice module, usp voice dialer,code encryptor ll keyfob w/led indicator/garage door activated, with overhead door contact , and speakers with voice drivers. Thanks for your help!
Carter.Beer 4U2

The V-40 is a bit of an odd bird in the Vista series. It does a lot of things a bit differently from most of the other models. It's really more of a commercial grade system.

Thanks again MrRonFl. This is an great site!