Electronic Alarms and Home Security Devices - dsc door chime

dsc 832 pc5010
5501 keypad


can anyone tell me how to turn the door chime on for zones 1,6,5 i hit *4 and the it is displayed in the corner but there is no noise when i open the door

Thanks

it may need to be set up in installers programming


if you know the 4 digit installers code- star 8 ( *8 ) _ _ _ _ (installers code)

the zone # with 10 in front of it- ( zone 1 = 101 zone 6 = 106)

then make sure the #3 LED is on, this toggles on & off each time you press the 3, 3 off, chime for that zone is OFF, 3 on, chime ON - if its off- hit 3 then it should be lit- hit # (onetime) then enter the next zone- again with 10 in front of it, turn that "3" on , # and so fourth. ## to exit

If you dont know what your doing, its risky - you could cause other problems.

RECAP- * 8 _ _ _ _ 101 3 (should turn on #3 LED / icon #3)

that is for zone #1- exit the programming by hitting ##

if the #3 is ON- then it should chime. default turns ALL zones on for chime if they are defined as DELAY or INSTANT in zone definition programming.

the 3 is lite up in all the zones i want to chime but still no chime:wall:

OK... keypad prgramming-


*8 _ _ _ _ 000 6

option 6 & 7 ON ( LED's 6 & 7 ON ) ### to exit ( NOTE iam adding 000 after the installers code- this is to go to keypad programming-



that turns on chime for both OPENINGS & CLOSINGS ( 6 = open, 7 = close ) LED 6 off, NO chime for openings, LED 7 off, NO chime for closings
### to exit

next -

keypad program- *8 _ _ _ _ * then the zone number 01, 02, 03 etc... (2 digits- zones 1-9 add 0 in front) NOTE * after installers code

LED # 1 on, ALL others OFF


go to the next zone, enter zone # (2 digits) turn on 1, all others off

### to exit ( do this for every zone that you want to chime)

thanks so much that worked
*8 5010 000 6 ,6
the number was not on now its is and chimes are working:)