Electronic Alarms and Home Security Devices - keypad programming help

Doityourself.com community forum was created to provide answers to all questions related to home improvement and home repair. Doityourself community can help you find information about how-to topics on small fixes to large remodeling projects. With comprehensive how-to content and expertly moderated community forums DoItYourself.com makes it easy to tackle even the most complex home improvement projects.



PDA

View Full Version : keypad programming help

domi288
03-25-09, 07:23 PM
dsc 832 (pc5010)
keypad 5501z

well i was setting up my alarm zones i manage to mess up the keypad commands can any one hlep please
the time doesnt display anymore
the chime doest work anymore but it says its on
*6 doesnt go in to program so i cant do anything with the time
all the function keys were messed but i manage to get them back in order

Thanks

AllTrack
04-06-09, 09:00 PM
You could have made changes in your keypad programming section of your system. Is your Keypad a PC5501z or a PK5501z? If you have the manual review the chime and clock sections.
If *6 doesn't work, you've changed your Master Code. Go into Installer program (*8 Installer code). Press 007 and enter your 4 digit Master Code followed by # to exit. This will reset your Master Code.