Electronic Alarms and Home Security Devices - Dsc wireless ps9047 control pad

Doityourself.com community forum was created to provide answers to all questions related to home improvement and home repair. Doityourself community can help you find information about how-to topics on small fixes to large remodeling projects. With comprehensive how-to content and expertly moderated community forums DoItYourself.com makes it easy to tackle even the most complex home improvement projects.



PDA

View Full Version : Dsc wireless ps9047 control pad

Ngford98
03-23-09, 09:31 AM
Hello,

I need help with installing a DSC dual tone 30watt siren. Can I install directly to the control panel board? I have the system up and running but would like to add this siren to it.

Thanks,

Nick

LOCKtec
03-24-09, 08:50 AM
NO

the 9047 is a LOW amp output. MAX- 50mA

you need to program 1 of the input/output connections (section 009) to output, then depending on which of the 2 terminals you are using, set (section 501 or 502) attributes for that output (fire/burg) and install a LOW amp draw relay and use an aux. power supply to drive the siren.

If you dont have the installers code or knowlage of the programming it will be a little hard to do.

BUT - there is no set connection for the siren to connect to- these connections at default are not programmed to do anything.

If you want a model number for a realy- P/M me, as i think i was removed under another name for naming the company & model # in another post.