Designing Kitchens and Bathrooms - bath vanity problem

Doityourself.com community forum was created to provide answers to all questions related to home improvement and home repair. Doityourself community can help you find information about how-to topics on small fixes to large remodeling projects. With comprehensive how-to content and expertly moderated community forums DoItYourself.com makes it easy to tackle even the most complex home improvement projects.



PDA

View Full Version : bath vanity problem

dba4777
03-07-09, 04:37 PM
we have remodeled our bath now down to the new vanity it seems the walls are not square and the vanity top is 7/8 from the wall any ideas on how this can be corrected

chandler
03-07-09, 06:34 PM
Welcome to the forums! 7/8", I guess it is out of whack! Have you figured out what caused it? Set a framing square in the corner and see if the walls are 90 degrees to each other. You may want to post a couple of pictures on a site such as photobucket.com and copy/paste the HTML code to your reply post. That way we can see what you see.
dba4777
03-08-09, 06:51 AM
here are the photos of what I see

http://i288.photobucket.com/albums/ll168/deb4777/bathremodel-1.jpg

Thanks for any suggestions maybe tile back splash!?!

chandler
03-11-09, 03:53 PM
I am assuming the other side is flush to the wall. What happens when you place the back of the cabinet and sink against the wall? Do you have a side splash in matching finish available? If you installed a side splash, would it take up the spacing and make it look better? I don't think tile as a backsplash will fill enough of the space to make it look good.