Electronic Alarms and Home Security Devices - wireless remote?

I have a vista 20 with talking keypad and 2 wireless remotes model#5804. The remotes are programed as zone 19 and 20. I bought 2 new remotes to add to my system model#5804 for my kids and need help programing them to the alarm. Does anyone know how to add them to my existing system and can you give me a step by step instruction on how to do this. I have no clue but follow instructions well.

key chain buttons pgm as follows:
loop 1 silent alarm
loop 2 off
loop 3 away
loop 4 stay

I have a vista 20 with talking keypad and 2 wireless remotes model#5804. The remotes are programed as zone 19 and 20. I bought 2 new remotes to add to my system model#5804 for my kids and need help programing them to the alarm. Does anyone know how to add them to my existing system and can you give me a step by step instruction on how to do this. I have no clue but follow instructions well.

key chain buttons pgm as follows:
loop 1 silent alarm
loop 2 off
loop 3 away
loop 4 stay

frist thing we need to see what your zone limit is

a. what is your zone list?

b. is ther a board in your panel box with 2 ant's ?

c. if yes to b what is the # on the tag ?

question a zone list
1 fr door wired
2 living room wired
3 din/kitchen wired
4 hall bath/ mid bdroom wired
5 mstr bdroom wired
6 glass break wired
8 motion wired
10 rear door wireless
11 bath wireless
12 motion wireless
19 key chain 5804
20 key chain 5804

Question B yes wireless board has 2 ant.

Question C tag # is sa5882

question a zone list
1 fr door wired
2 living room wired
3 din/kitchen wired
4 hall bath/ mid bdroom wired
5 mstr bdroom wired
6 glass break wired
8 motion wired
10 rear door wireless
11 bath wireless
12 motion wireless
19 key chain 5804
20 key chain 5804

Question B yes wireless board has 2 ant.

Question C tag # is sa5882

ok i see you have 3 wireless zones
but you say 19 and 20 are 5804's do to each one takes 4 zones and you want to add 8 more zones = 2 5804's and is ther any more # on the wireless board

Your description sounds accurate to me, that's what I want to do. All numbers and letters are as follows on wireless card:

sa5882-2m e
w57553
b231
as or a5?

Your description sounds accurate to me, that's what I want to do. All numbers and letters are as follows on wireless card:

sa5882-2m e
w57553
b231
as or a5?

well the sa5882-2m is waht i was looking for this unit only has 16 wireless zones and you have 11 beeing used you can only add 1 5804 with all 4 loops
loop 1 silent alarm
loop 2 off
loop 3 away
loop 4 stay

or 2 5804's with 2 loops

loop 2 off
loop 3 away

and waht type of keypad do you have?

I have 2 keypads as follows:

Ademco 6160V Voice Alpha Display Keypad Program Vista

Ademco 6137B Alarm Keypad Fixed English

I have 2 keypads as follows:

Ademco 6160V Voice Alpha Display Keypad Program Vista

Ademco 6137B Alarm Keypad Fixed English

good we will need the alpha keypad for programing and witch way do you want to go

add 1 5804 with all 4 loops
loop 1 silent alarm
loop 2 off
loop 3 away
loop 4 stay

or 2 5804's with 2 loops

loop 2 off
loop 3 away

What do I need to make both remotes work with all buttons? If there is something I'll buy it then follw the instructions you give.

What do I need to make both remotes work with all buttons? If there is something I'll buy it then follw the instructions you give.

you need to buy a 5881h receiver this will give you more zones

Honeywell 5881ENH 64 Zone<br> Wireless Receiver (http://www.aesecurity.com/5864zowire.html)