Heat Pumps and Electric Heating - York Electric Furnace

Doityourself.com community forum was created to provide answers to all questions related to home improvement and home repair. Doityourself community can help you find information about how-to topics on small fixes to large remodeling projects. With comprehensive how-to content and expertly moderated community forums DoItYourself.com makes it easy to tackle even the most complex home improvement projects.



PDA

View Full Version : York Electric Furnace

pkerpash
02-16-09, 07:49 AM
I have a York electric furnace in which one of the three heating elements works. Checked continuity and power supply on the other elements, they seem fine. Checked incoming power supply and it appears satisfactory. Replaced the circuit board, that did not fix problem. I want to run the wiring diagram but the one on the cover is hard to read. Drawing # is 035-10063B000 REV A furnace model # is N2AHD10A06D s/n EHBS059909. Does anyone out there have suggestions or the wiring diagram. The furnace is approximately a 1993 model.

Jay11J
02-16-09, 08:19 AM
I am not able to find anything online for your model.

Not sure if you have a board or not. but where the t-stat wires hooked up at the air handler, is there W1, W2, W3, or Maybe E, or Aux?
dun11
02-18-09, 06:29 PM
chk the sequencers:thumbup: