Boilers - Home Heating Steam and Hot Water Systems - Savio Acquapiu - Boiler not firing up - Help
Doityourself.com community forum was created to provide answers to all questions related to home improvement and home repair. Doityourself community can help you find information about how-to topics on small fixes to large remodeling projects. With comprehensive how-to content and expertly moderated community forums DoItYourself.com makes it easy to tackle even the most complex home improvement projects.View Full Version : Savio Acquapiu - Boiler not firing up - Help
JustinKace
02-07-09, 11:45 AM
Hi all,
I have a recently fitted Savio Acquapiu bolier which does not want to fire up. ( Just out of warranty )
The pump is turning freely and can be heard...
The red cut out light/swtich is lit - So i assume it needs to be reset, but pressing the reset button does not do anything... it remains lit and refuses to fire up.
The air pressure fan is not spinning... I asume this will only start to spin once the cut-out light has been reset.
I have checked the reset switch/ and tried overriding it - this has no affect.
Is there any other hidden resets on the bolier or another way to try and reset it?
The red cut-out switch is lit from the moment power is turned on the bolier. - It remains lit/cut-out so i am without heating and hotwater until i can get this fixed...
Water pressure at 1.2 Bar in CH.
Please help....
I have a recently fitted Savio Acquapiu bolier which does not want to fire up. ( Just out of warranty )
The pump is turning freely and can be heard...
The red cut out light/swtich is lit - So i assume it needs to be reset, but pressing the reset button does not do anything... it remains lit and refuses to fire up.
The air pressure fan is not spinning... I asume this will only start to spin once the cut-out light has been reset.
I have checked the reset switch/ and tried overriding it - this has no affect.
Is there any other hidden resets on the bolier or another way to try and reset it?
The red cut-out switch is lit from the moment power is turned on the bolier. - It remains lit/cut-out so i am without heating and hotwater until i can get this fixed...
Water pressure at 1.2 Bar in CH.
Please help....
HVAC Mech.
02-08-09, 10:30 AM
Some new flame safety controls are purposely built so they can be reset 3 times only. This is for safety, so the firepot doesn't get filled up with oil. It's called idiot proofing. :D
If we told you how to reset it, that would defeat the purpose, now wouldn't it?
Tom Beer 4U2
If we told you how to reset it, that would defeat the purpose, now wouldn't it?
Tom Beer 4U2