Outdoor Power Equipment and Small Engines - 1984 toro S-620 snow thrower

Doityourself.com community forum was created to provide answers to all questions related to home improvement and home repair. Doityourself community can help you find information about how-to topics on small fixes to large remodeling projects. With comprehensive how-to content and expertly moderated community forums DoItYourself.com makes it easy to tackle even the most complex home improvement projects.



PDA

View Full Version : 1984 toro S-620 snow thrower

kfx400
02-02-09, 08:27 PM
Newbie here.:)

Model # 38162
SN 4043284

I am posting link of a picture of the carb that is installed on this machine.
My ? is which screw is the high speed and which is the low speed and how many turns out from bottomed out do they need to be set at?:wall:


Parts and Diagrams for Toro Consumer 38162, S-620 Snowthrower, 1984 (SN 4000001-4999999) (http://www.partstree.com/parts/?lc=toro_consumer&mn=38162%2C+S-620+Snowthrower%2C+1984+%28SN+4000001-4999999%29&dn=3312_228-2_228005-0005)

indypower
02-03-09, 07:12 AM
There should be an "H" and a "L" stamped on the housing above the screw. "H" is high, "L" is low speed. Both should be adjusted 1-1/2 turns out from bottom. This is a basic starting point. Adjust from there at 1/8 turn. Adjust low speed at idle, high speed at wide open. At idle the high speed adjustment has no effect and at wide open the low has no effect.
dodad
02-03-09, 03:45 PM
Do a search for toro , they have an excellent site..

kfx400
02-03-09, 04:40 PM
Do a search for toro , they have an excellent site..

Thanks Dodad,I found the answer to my ? on the toro Site.:)
You are my hero LOL.Beer 4U2