Bricks, Masonry, Asphalt and Concrete - Cutting concrete block wall
Doityourself.com community forum was created to provide answers to all questions related to home improvement and home repair. Doityourself community can help you find information about how-to topics on small fixes to large remodeling projects. With comprehensive how-to content and expertly moderated community forums DoItYourself.com makes it easy to tackle even the most complex home improvement projects.View Full Version : Cutting concrete block wall
csarest
01-31-09, 05:43 PM
I have a concrete block wall 3' high, and I need to cut out a section about 4-5 feet wide so I can drive a garden tractor thru it.
What would be the best way to cut this... should I just rent a rotary saw with a diamond blade and make sure I'm cutting thru the hollow areas of the block?
What would be the best way to cut this... should I just rent a rotary saw with a diamond blade and make sure I'm cutting thru the hollow areas of the block?
Speedwrench
01-31-09, 06:23 PM
rent a saw with the diamond blade and don't worry about the hollows and use a crayon or lumber marker so the line doesn't wash off. you might want to consider using a 1x4 and tapconing it to the wall for a straight edge to help with the cut for a good straight line. i would cut it about 3-in wider on each side and frame in and pour concrete on each edge to reinforce the blocks after they dry.
that also will give you a better looking cut.
life begins when the kids leve home and the dog dies.
that also will give you a better looking cut.
life begins when the kids leve home and the dog dies.