Fireplaces, Heating Stoves, Flues and Chimneys - Carrier 9200 Problem
Doityourself.com community forum was created to provide answers to all questions related to home improvement and home repair. Doityourself community can help you find information about how-to topics on small fixes to large remodeling projects. With comprehensive how-to content and expertly moderated community forums DoItYourself.com makes it easy to tackle even the most complex home improvement projects.View Full Version : Carrier 9200 Problem
Don D44
01-29-09, 09:17 AM
I just replace my induction motor on my furnace. I hooked everything back up and it ran fine and heated the house back up to 67 degrees, from about 47. Its cold here in norther ohio. When i got home from work at 0130 i found that it had stopped working again. The fan starts and then the iduction motor starts blowing. The ignitor starts and then it calls for gas and the burners start. They only run for about 5 seconds or so and then go out. It tries 3-4- times and then quits. Again this is after I had replaced the induction motor and it ran fine for around 5 hours or so and then started this problem. any suggestions. Thank you